 |
 |
 |
 |
 |
 |
 |
March 20, 2008
Last ELECTRONICAL post...
I know we've been talking about ELECTRONICAL a lot these days, but hey, we are psyched. Here is the most important info about it so far:
Available Now and Shipping.
Featured riders:
Mike Aitken
Gary Young
Matt Beringer
Aaron Ross
Jimmy Levan
Jim Cielencki
Taj Mihelich
Chase Hawk
Adam Banton
...Plus many more!
Package includes Electronical on the main disc, as well as our previous 2 videos, bonus footage and full Chase Gouin part on the second disc. That's right, 2 disc's of AWESOME!!!!!
Click below for cover artwork.
Thanks.
finaly!!!
Posted by: gc at March 20, 2008 11:40 AMI want it soo badly but I am broke as a joke. and because there were no electronical premiers around me where I could get a poster from I made my own collage/poster of all odyssey riders and ads for Electronical. I want this video.
Much Love Odyssey,
Patrick
Make Classic Flat forks without brake mounts and Chase bars with sweep asap!
Posted by: Daniil at March 20, 2008 10:08 PMI just got The movie, and it's seriously one of the best BMX films I have ever seen. the two disc set was an awesome idea, tons of extras, totally worth it. Seriously, thank you to everyone at Odyssey for your good work on this film.
Posted by: Ryan at March 20, 2008 10:18 PMDaniil- You have not been paying attention to the world.
Chase Bars are made with sweep. Chase Gouin BS bars (The BS is for Backsweep)
I dont think the classic flat fork would be without brake mounts to begin with unless you like to ride street on flat forks or are brakeless since very few if any flatlanders run rear brakes only.
Posted by: Chris-Not from ODSY at March 20, 2008 11:28 PM"Make Classic Flat forks without brake mounts(...)" yep!!!
Posted by: makowsky at March 21, 2008 11:38 AMEsta de boby!!!!!!!! que bueno que suban el nivel de peliculas de bmx..... que pena que a Chile no llege su video...solo queda traerlo por encomienda...
Posted by: D1360 at March 21, 2008 11:45 AMChris-Not from ODSY: I'm well aware that Chase bars with sweep are made; however, non of them live to standards of Odyssey QC and this is why they are not available in the US, they just don't have an exact amount of sweep they supposed to have thus constantly being sent to scrap.
There are a lot of brakeless flatlanders and plus I remember Odyssey guys said that the Flat forks will be made in small batches so why not to make Zero offset Flat forks without brake mounts? Dang Odyssey I've been waiting for a brakeless Odyssey Flat fork for more than three years!
Posted by: Daniil at March 21, 2008 12:20 PMFLATLAND UPDATE!!! NEED TO KNOW WHAT TERRY CHASE & THE "SECRET" RIDERS ARE UP TO!!!
What parts are in the works???
Posted by: Jon at March 21, 2008 02:23 PMwhen will the clear pc's be avaible?
I did have the chance to talk with chase over the Toronto bike show weekend and he did say something about the bars not having the right amount of sweep. I saw them for myself. The ones he had were 4 degrees of backsweep and 3 degree upsweep, unlike what was originally going to be 6 and 6 if I recall correctly.
I also tend to agree with the flat fork situation. Its just because flatland isn't the biggest seller these days, it makes little sense to make specific version of flat forks to market though Odyssey does a heck of a lot better in the forks department than a lot of the other companies I've seen. The least that could have been done when the directors came out was make a zero sweep set of director forks!!!
Posted by: Chris-Not from ODSY at March 21, 2008 06:04 PMHey Odyssey, what did you mean by "as well as our previous 2 videos"?
Are the discs region-specific? I'm going to buy that just because of Chase Gouin.
Make Classic Flat forks without brake mounts asap P-L-E-A-S-E!
Posted by: Daniil at March 21, 2008 08:40 PMI may give up waiting for Chase bars and order a custom set from London Bikes for 1.5 times more money but I ain't give up waiting for forks, they are the best damn forks out there, period! Come on, if I understood that correctly, George said on BikeGuide that Ratchet hubs are not shipping because you don't have required amount of stuff to ship to fill the whole container, so make those forks and fill some space in the container! You may also want to kick some asses and make those Taiwanese make the Chase bars right, damn them.
Posted by: Daniil at March 21, 2008 08:46 PM"If I understood that correctly, George said on BikeGuide that Ratchet hubs are not shipping because you don't have required amount of stuff to ship to fill the whole container."
You did not understand him correctly. What he has said is it takes time to make sure a completely new product is manufactured correctly. This can and often does lead to "delays".
Posted by: Ben at March 21, 2008 09:16 PMwow the best video ever bought it the min the down the street got it and the alt intro would have made a sweet trailor to but gary young for nora cup video part of the year and waas the video hd cause it looks like it
Posted by: mike at March 22, 2008 03:15 PMNew Flatland Parts what are they??????
35mm Stem? 150/155mm Wombolts? Pivotal Seat? Smaller Sprockets? Pegs? AAAAAAHHHHH!!!! I NEED TO KNOW!!! :)
Posted by: Jon at March 23, 2008 05:57 AMHow much lighter does the Kevlar make each (different model) tire?
Why did you go from great, dependable regular brake pad nuts to allen head crap?
What happened to the Trailmix Magnesium Sealed Pedals? It's quite a significant time since it's expected Thanksgiving release....
I want a copy so bad!
Posted by: Young G at March 26, 2008 09:56 AMfuuuuuckkkkkk i need to get this shit
i also need to get some new evolvers... its about time i upgrade my front brakes...
Posted by: bostongeorge at March 27, 2008 01:45 AM
hey awesome video!!
whats that song in the outro i love it!!
Posted by: frank at April 3, 2008 03:25 PM