 |
 |
 |
 |
 |
 |
 |
June 20, 2006
WOMBOLTS!!!!!!!
...are coming soon.
Due to the unrelenting emails/requests/message board posts about the Wombolt cranks, we figured we had to give you an update.
As of right now, we will be receiving a small amount of cranks (175mm RHD) in our warehouse by the first week of July. These will be enough to wet some appetites and/or drive some people nuts.
Considering these cranks have been pushed back to ensure they were exactly to spec, the release of the first batch will be dependant on the Quality Control (QC) process here in our warehouse, which we "plan" to go smoothly.
We thank everyone for their patience, but good things come to those who wait.
Posted by Nuno O at June 20, 2006 11:11 AMWOOOOOOOOOOOOOOOOOOO FINALLY !!!!
Posted by: Jon at June 20, 2006 11:54 AMwhen are you going to make 165 mm version?
Posted by: Daniil at June 20, 2006 12:11 PMneat stuff
Posted by: Tom from Iowa at June 20, 2006 12:12 PMWHen are you gonna make LHD?
Posted by: G-FUNK at June 20, 2006 12:21 PMAre the arms going to be as huge as the Profile SS or fatter?
Posted by: Heng at June 20, 2006 01:28 PMwhen are the 180mm coming?
Posted by: panchito at June 20, 2006 01:46 PMwhat is included with crank set?
Posted by: Daniil at June 20, 2006 01:57 PM^^just the cranks
Posted by: gr8est1 at June 20, 2006 02:37 PMfinnally some updates!!!!!!
I have been checking this site for allmost everyday for wombolt updates. lol
So what will the finnal weight be?
What will the price be?
where/when will you be able to get these cranks when they come out because mmy spindle is like 20 mm so i got broom handle bushings and electritians tape holding then in and my crank comes loose like every 2 hours becasue of this....basicly what im saying is i need a crank soon and dont think ur better then me just cuz u dont have electritians tape holding ur crank together .. im from saskatchewan all we do is hunt seals and throw bottles at signs
Posted by: brodie at June 20, 2006 03:06 PMI'm loving them! and the wombat on the box! Will they be available in 170??
Posted by: Brett at June 20, 2006 03:06 PMright on!
Posted by: clint at June 20, 2006 07:32 PMI think I just peed a little.
Posted by: Josh at June 20, 2006 07:34 PMWords fail me... cheers guys cant w8 to ride them!
Are you gonna do different bb sets as well like spanish or mid with them??
Posted by: Chris Bevan at June 21, 2006 07:53 AMthey have said it a million times, it won't come with bearings. i have a question.
if i don't run pegs, would u recomend me to run an aluminum axle on my vandero hub? i don't run pegs and i am not the that harsh to my bike either so would it hold up?
Posted by: panchito at June 21, 2006 09:29 PMwhat size spindle do the first atch come with and how much do they weigh
Posted by: cody at June 22, 2006 12:47 AMthe cranks have 22 mm spindle with built-in sprocket adapter
i wonder how much does crank set without bb weighs?
Posted by: Daniil at June 22, 2006 10:15 AMwow i cant wait to get ahold of those babies. whats the final weight, and the final price??
Posted by: mark at June 22, 2006 12:53 PMhow much are these gonna cost cuz i need new cranks im runnin some snafu 4130's that make funny sounds when i pedal
Posted by: richardkelly at June 22, 2006 03:19 PMweight?? are they a similar deisgn to mtn bike 2 peice like shimano saint with the external euro bb? with 22mm spindle?? i'm a bike mechanic and i get kids asking me all day long...i'd liek to give them an answer
Posted by: paul at June 22, 2006 09:41 PMpanchito im not on the web everyday like you so i wouldnt know if they come with bearings or not
Posted by: Chris Bevan at June 23, 2006 09:27 AMwell, chris beaven, its no my fault that i like to keep myself informed.
Posted by: panchito at June 23, 2006 10:54 AMWHO ? I SEE VERY INTRAKIT-KAT !
Posted by: arnieasada at June 23, 2006 02:49 PMHey how much are these gonna weigh cuz i need some lighter cranks and these look bad ass and everyone iz talkin bout them. So i need some new onez!
Posted by: Hayden Payne at June 23, 2006 04:01 PMhit me back when the 180mm are in stock.
Posted by: AL D at June 25, 2006 04:14 AMlifetime warranty?
Posted by: joe at June 25, 2006 06:45 PMTime to retire the legendary FSA smack daddys, waiting on the 180mm though.
Posted by: Tim at June 26, 2006 02:59 AMa small amount of cranks, wouldnt it be funny if they only gave then like 2 pairs?
Posted by: cankles at June 26, 2006 10:56 PMHOW MUCH ARE WE TALKIN?
Posted by: burnaccinator at June 27, 2006 08:13 PMoi when in the uk???????u always leave us buggers out!one
so get em out soon
c'mon wiley man
Yeah panchito spell my name right next time...
Posted by: Chris BEVAN at June 28, 2006 07:34 AMhey wats up i just wanted to know how much these will cost and when they will be out?
thanks
pat
Posted by: patrick willoughby at June 29, 2006 05:11 AMproper mint chaps!!
Posted by: burnaccinator at June 29, 2006 07:49 PMhello i'm like your products ........
Posted by: franky at June 29, 2006 08:50 PMHow much will thay cost
Posted by: Mike Sung at June 29, 2006 10:54 PMwill these be available in colors other than the industry standards of black and polished?
Posted by: Brian at June 30, 2006 10:52 AMok its early july and my appetite is craving these
Posted by: richardkelly at July 3, 2006 09:44 PMThe rumor is they should be delivered to our warehouse today...thats what I hear.
We will bust into them ASAP and check them out.
Posted by: Jim B at July 6, 2006 11:11 AMPosted by Nuno O at 11:11 AM
Posted by Jim B at July 6, 2006 11:11 AM
11:11 ...coincidence i think not
Posted by: brodie at July 6, 2006 12:13 PMThe cranks are here.
Posted by: Chris Cotsonas at July 6, 2006 05:23 PMSend them to South Africa. I got customers gaging for that shit. Whats up with the r&d on the new freecoasters? I need a new reloader, mines nearly 2 years old. Rules.
Posted by: james @ City Cycles at July 7, 2006 06:50 AMWe're working on a lot of new hub stuff...that's all I can say for now, unfortunately.
Posted by: Chris Cotsonas at July 7, 2006 08:22 PM