May 30, 2003
Adam Banton Bike Check

I mustache you a question.....
frame- Dragonfly Tech (cut dropouts)
fork- Custom Odyssey fork w/990's
bars- Milk bars-12 degree
stem- CFN w/tabs
headset- Solid
gyro- Odyssey GTX-R
levers- Odyssey Modulevers (end shaved off right)
saddle- Odyssey Marcell (kevlar)
seatpost- Odyssey Intac (25.4)
clamp- Mosh
rims- Odyssey hazard lite 36 hole (chrome)
hubs- Odyssey vandero front. Odyssey cassette rear (hollow axle/ 12 t driver)
sprocket- Odyssey Compact (33 tooth) with guard
cranks- Odyssey 41 thermal cranks
chain- Wienmann
pedals- Odyssey Jim C. signature (sealed, Magnesium)
brakes- Odyssey evolvers (sample color)
pads- Odyssey 1x4
tires- Odyssey Prototype rear (20x1.85) Odyssey groundwork front(2.1)
pegs- Odyssey Ti Pegs (4)
cable- Odyssey modulever upper/ brakeline lower
grips- Odyssey Gedda 2
barends- Odyssey barcaps (alloy)
Posted by Jim B at
03:24 PM
|
Comments (184)
Cielencki ad
Be sure to check out the new Ride Magazine (with corey martinez on the cover)for the Jim Cielencki pedal ad. We took an unusual approach at making the ad, and hopefully you are as excited with it as we are. Thanks to Jim bauer's ingenuity, rich hirsch, mouser and jim c. for helping out. Also to Scott Papiro for doing a great job on such short notice.
May 29, 2003
Where is Odyssey?

We have been filming for the Odyssey "untitled" video project.
Tell me where this is and get a prize.
More coming...
Posted by Jim B at
03:01 PM
|
Comments (70)
May 27, 2003
Trade Show
Jim and myself just returned from the Trade Show at the east coast terminal skatepark in binghamton New York. It was good seeing old friends and hanging out with everyone. To bad the rain wrecked our trails session.
Thanks to Crandall and Jeff Harrington for putting this show on, and inviting us to attend. Hopefully next time every BMX bike shop will send a rep to check out the BMX Specific trade show.




May 19, 2003
12/13 tooth drivers

Today we received some samples for our 12/13 tooth one piece drivers. why would anyone want a 12 or 13 tooth driver you ask?? simple. Many frames are still being made with brakes mounted on the chainstays, therefore the smallest you can (usually) go gear wise is 36/13. Considering you cant go any lower, and you probably wont be going up, why not have a solid one piece driver to make your hub a little better (without adding on any weight). One piece is better than 4.
The 10t driver is on the way, so we figured we might as well have one piece drivers all the way up to 13. the 12t is on my bike now and it feels awesome.
PLEASE NOTE: the 12/13t drivers are not available yet. These are just samples for us to test before production.
Lightweight

After much cutting, trimming, and a custom prototype of the new "flame" frame from KINK, Jim C has gotten his bike weight down to 12 pounds.
hang loose bro.
Posted by Jim B at
02:01 PM
|
Comments (169)
May 15, 2003
Daniel Randall bike check

Little did you know that Daniel Randall does it for Odyssey...
frame- We the People, 4Seasons
fork- Odyssey race fork/old style
bars- Odyssey Civilian bars
stem- Hoffman inverted
lever- N/A
saddle-WTP small padded
seatpost- Odyssey intac (25.4)
clamp- Odyssey GI
rims- Odyssey hazard lite 36 hole (chrome)
hubs- Odyssey vandero front. Odyssey cassette rear (with hollow axle and 11t driver)
sprocket- Odyssey Battlegear (28 tooth)
cranks- Odyssey 41 thermal cranks (175mm)
chain- 410 Chain
pedals- Odyssey Jim C. signature (looseball)
brakes- N/A
pads- N/A
tires- Odyssey Elm St. Rear (20x1.85)/Odyssey Prototype Front (20x2.1)
pegs- Sample/prototype ultra short pegs
cable-N/A
tensioner-Odyssey PACT
barends-Odyssey
grips-Ribbed
Posted by Jim B at
01:44 PM
|
Comments (174)
May 13, 2003
Punch Me in the Face!

What did you do at Roots? I was busy Punching Mike Andrews in the face(at his request)so he could ride better. He rode great after one to the Jaw.
Posted by Jim B at
09:15 PM
|
Comments (154)
Samurai Pictures

These are some photos that I had from the Samurai Trip that Rooftop invited me on. Despite a little rain, everybody had an amazing trip. 1.) Nor Cal sunset before we eat at Applebees 2.)I forget where this is but we drove on this road forever. 3.) Camping and then waking up to swim in hot springs is the best, Southern Oregon. The Samurai Video will be out for Christmas, watchout!
May 12, 2003
Rich Hirsch Bike check

Rich's bike is....
frame- Marcus Wilke signature/in titanium color
fork- Odyssey race fork/red
bars- Odyssey Civilian bars
stem- Mosh Digital stem
lever- Mosh generic complete lever
saddle- Mosh small padded
seatpost- Odyssey intac (25.4)
clamp- Mosh
rims- Odyssey hazard lite 36 hole (chrome rear/black front)
hubs- Odyssey vandero front. Odyssey cassette rear (hollow axle/11t driver)
sprocket- Odyssey Battlegear (28 tooth)
cranks- Odyssey 41 thermal cranks (170mm)
chain- Kool Chain
pedals- Odyssey Jim C. signature (Sealed/Magnesium)
brakes- Odyssey evolvers
pads- Odyssey 1x4
tires- Odyssey Earth Science Rear (20x1.95)/Bermuda Front (20x1.95)
pegs- One Mosh Rear/2 Odyssey titanium Front
cable- Odyssey prototype (red)
tensioner-Mosh
hubguard-FBM
barends-Mosh
grips-Gedda 2(red)
Posted by Jim B at
06:02 PM
|
Comments (189)
Bmx trade show
For all you northeast/east coast riders and bike shop people, Odyssey will be at the bmx specific trade show at the east coast terminal the 2 days before the la revolution contest (Thursday, Friday), so come down and show your support. We will have most of our new goodies to show, so come by and say whats up.
Check www.lastcalldistro.com for more info.
May 09, 2003
Jim Cielencki bike check

Jim C. was recently in town to shoot for his upcoming pedal ad, so we decided to grab his bike and shoot some photos for a bike check. here it is.
frame- Kink Jim Cielencki signature
fork- Odyssey race fork
bars- Kink high life bars
stem- Kink front loader
headset- King bottom cup/pig upper cup
gyro- Odyssey GTX-R
grips- Odyssey gedda 2
lever- Odyssey trigger
saddle- Odyssey marcell (kevlar)
seatpost- Odyssey intac (25.4)
clamp- Kink light
rims- Odyssey hazard lite 36 hole (chrome)
hubs- Odyssey vandero front. Odyssey cassette rear (hollow axle/ prototype 10 t driver)
sprocket- Kink (28 tooth)
cranks- Profile (175mm) Odyssey 41 thermal cranks not available at time of photo.
chain- Kmc 410
pedals- Odyssey Jim C. signature (looseball)
brakes- Odyssey evolvers
pads- Kool stop
tires- Odyssey earth science (20x1.95)
pegs- Kink lite
cable- Odyssey brakeline upper/ regular lower
grips- Odyssey Gedda 2
May 07, 2003
Mikey Aitken

photo: Scott Papiro
Posted by Jim B at
08:48 PM
|
Comments (155)
Rich/11t/Compact

photo: Scott Papiro
Posted by Jim B at
08:45 PM
|
Comments (153)
Gary/Civilian

photo: Jeff Z
Posted by Jim B at
07:39 PM
|
Comments (158)
First News
Well, If you are here you already know that the newest thing here is the Daily Word. Check back Daily for news from Us here at Odyssey. Thats Chris, Nuno, Jim and our team members who have news. The newsletter is still available, the Online Store is operational, and New Pics, Info, and features have been added around the site. Check it out.
Posted by Jim B at
06:29 PM
|
Comments (148)