So, what do we have here? Well, we’re fortunate enough to be working with a facility that has the official patent licensing rights for the threadless headset, and this means that you can count on the headset having the highest level of quality and reliability right out of the box. There’s no fussing about to get it to spin properly, and the tolerances are all being kept to the proper standards. The 45-degree precision ground bearing raceways are laser-etched with all of the pertinent technical information, and our top-cap offers one of the lowest overall stack heights available. As a bonus, we’ve also included some 2 and 3mm headset spacers that use the same finish as the top-cap. The color options are white, black, gold or high-polished. There are no overly gaudy graphics to deal with, and because this is a BMX-specific headset we’ve decided to go without the “throwaway” pre-load and star-fangled nut. Simple and straightforward. We're confident that you'll enjoy it as much as we do.
» This Flipbook is embeddable. Size it by changing 500 to the desired pixel width and then copying the code below
About the flipbook above:
Odyssey integrated headsets are now available! Consult the flipbook for full details. Also, there’s a lot of conceptual stuff in the works on the headset horizon. Please keep an eye on the Daily Word for regular updates.
don’s right, people just can’t be happy with what they have, including me, because i think it would be awesome if there were some larger spacers included, such as the wtp ones, where they include like a 7mm and a 5 mm and such.
blake ( March 13th, 2009 at 4:04 pm ):
you should do more colours such as purple , blue
dan ( March 13th, 2009 at 4:18 pm ):
sweet! just in time because i need a new one after almost a year.
does blackout have these in stock yet?
John ( March 13th, 2009 at 7:04 pm ):
Looks nice. Just, what’s the improvement over something such as an FSA? If there’s enough of an improvement, I may consider grabbing one if you make red ones…
Adam Banton ( March 13th, 2009 at 7:39 pm ):
This is totally gonna blow away my Dynatron headset! Haha, I love you guys! So stoked to have a spinning bars again. Thanks!
pleace release the muthafuckin jc pc pedal cuz the twisted arent’ lasting too much
sam stanfield ( March 14th, 2009 at 2:07 am ):
woohoo! pretty soon, every part on a bike will be odyssey except the frame. its about time you guys made this, ive been trusting the kink set for a while, but ive cracked a couple bottom racers. its time the headset is once again officially produced. cheers.
Wade ( March 14th, 2009 at 4:31 am ):
Sam Steinfield. You’re a dildiot.
Just where do you think they had the connection to do the 41 thermal process?
Sunday is part of the Odyssey family. So if you’re using Sunday frame, then, yes, you’d be short having a complete Odyssey bike except for the chains.
DustCap ( March 14th, 2009 at 4:34 am ):
Great! Just when I had a full toolbox of these damn headset spacers, they’re going to give you another!
After I buy this I’m gonna make me a necklace out of ‘em!
titbg="0xdddddd" bgcolor="0xcccccc" infocolor="0xFFFFFF" titcolor="0xFFFFFF" titalpha="90"
Are you going to do a chain next? Something like black KMC Z510HX would be great!
it’s never enough NOOO it’s never enough!
don’s right, people just can’t be happy with what they have, including me, because i think it would be awesome if there were some larger spacers included, such as the wtp ones, where they include like a 7mm and a 5 mm and such.
you should do more colours such as purple , blue
sweet! just in time because i need a new one after almost a year.
does blackout have these in stock yet?
Looks nice. Just, what’s the improvement over something such as an FSA? If there’s enough of an improvement, I may consider grabbing one if you make red ones…
This is totally gonna blow away my Dynatron headset! Haha, I love you guys! So stoked to have a spinning bars again. Thanks!
pleace release the muthafuckin jc pc pedal cuz the twisted arent’ lasting too much
woohoo! pretty soon, every part on a bike will be odyssey except the frame. its about time you guys made this, ive been trusting the kink set for a while, but ive cracked a couple bottom racers. its time the headset is once again officially produced. cheers.
Sam Steinfield. You’re a dildiot.
Just where do you think they had the connection to do the 41 thermal process?
Sunday is part of the Odyssey family. So if you’re using Sunday frame, then, yes, you’d be short having a complete Odyssey bike except for the chains.
Great! Just when I had a full toolbox of these damn headset spacers, they’re going to give you another!
After I buy this I’m gonna make me a necklace out of ‘em!
when will they be in stores?
now we need a pivotal post and some good-looking chains to complete the bike..!!
what? no ceramic bearings or ti-whatever the hell it is?
comeon i wanna have to spend 150$ for something that should be cheap!
i kid, i kid. you all know this.
ody = best
who does all your in-house photography (NUNO?)
About time you guys came up with a headset! What are the specs on the bearings that were used?
Wonderful! What’s the word on the 9 tooth drivers for the Ratchet?! People are growing restless. :)
-dan
we will have these in stock at black out sometime this week.
hey bobby, thanks for the update.
[...] Odyssey Integrated Headset (Odyssey) [...]
hey would you’s do all your products in pink for me as im the hell emo faggot poofter sissy girl fuckwit???
P.S. im wearing my little sisters jeans!