• bgcolor="0x006600" infocolor="0xFFFFCC" titbg="0x0099cc" titalpha="70"

Flipbooks »

Bike Check: Terry Adams
FRAME: Flatware, Prototype
FORK: Flatware, Prototype
BARS: Flatware Terry Adams, Bayou Bars, Prototype
STEM: Flatware, 28mm, prototype
HEADSET: Odyssey, prototype
CRANKS: Flatware Twombolt, 160mm, Prototype
SPROCKET: Flatware, 22t, Prototype
RIMS: GSport Ribcages, powdercoated
FRONT HUB: GSport Marmoset
REAR HUB: Ares Freecoaster
SEATPOST: Odyssey Intac
SEAT: Odyssey Veteran
SEAT CLAMP: Mr Clampy
PEDALS: Exercise Bike
PEGS: Flatware Plegs, Prototype
CHAIN: Generic
BRAKE: Odyssey Evo2
BRAKE PADS: Slim by 4, Red, Medium
LEVER: Odyssey Monolever, Medium
CABLE: Odyssey Slic Cable
TIRES: Frequency G, Foldable, Tanwall
BARENDS: Odyssey Par ends
PHOTOS BY ROBBY KLEIN
DAILY WORD
 » This Flipbook is embeddable. Size it by changing 500 to the desired pixel width and then copying the code below

About the flipbook above:

There are a lot of Flatware products currently in the prototype stages and Terry Adam’s ride has just about all of them. Check out his bike check above to get a full list and a closer look. Also, if that shirt looks familiar, it’s the Frequency G tire pattern shirt we posted about a while ago.

All photos are by Robby Klein.

  • email
  • Twitter
  • Facebook
  • MySpace
  • Google Bookmarks
  • Yahoo! Bookmarks
  • Digg
  • del.icio.us
  • StumbleUpon
  • Tumblr
  • Propeller
  • Fark
  • Yahoo! Buzz
  • Reddit
  • blogmarks
  • Ping.fm
  • Live
  • Faves
  • Add to favorites
  • Slashdot
  • Design Float
  • SheToldMe
  • RSS

Comments: 45 Comments
Categories: Bike Checks, Flatware, Flipbooks, Product Updates
Tags: Bayou bar, EVO 2, flatland, Frequency G, Intac post, Marmoset, Monolever, Mr. Clampy Too, Ocean Blue, par ends, Pleg, prototype, Rhode Island, Ribcage, Robby Klein, Short Stack Headset, Slic Kable, Slim by Four, socket drive, Terry Adams, Twombolt, Veteran

Top

45 Responses to “Bike Check: Terry Adams”

  • Kevin ( February 16th, 2009 at 5:36 pm ):

    crayzeeeeee nice

  • owen ( February 16th, 2009 at 5:37 pm ):

    thats freakin badass. im lovin the colours

  • victor ( February 16th, 2009 at 5:48 pm ):

    That is sweet. I the rims.

  • gsguccilife ( February 16th, 2009 at 6:05 pm ):

    Please,put them rims on the markt…

  • BUDHA ( February 16th, 2009 at 6:06 pm ):

    KOOL…..THATS WHAT WE NEED….!
    I HOPE YOU GUYS WILL OFFERING THAT COLOR(BLUE)….I HAVE A QUESTION….WHATS THE TOP TUBE SIZE, I’D LIKE TO USE IT FORE EVERTHING ELSE TOO.

  • strappy ( February 16th, 2009 at 6:09 pm ):

    WOW! I dont have a flatland bike but DAMN do I now want one.

  • face ( February 16th, 2009 at 6:12 pm ):

    super nice super clean one of the nicest bikes ive ever seen

  • freestyle now ( February 16th, 2009 at 6:22 pm ):

    now that is one of the best looking bikes i have ever seen since i laid my eyes on the 1982 redlines.

    man that would have to be the best colours out there.
    you gotta bring out a longer top tube like 19.5 or such

    t bomb has it going on

  • Adam Banton ( February 16th, 2009 at 6:49 pm ):

    Sick Bike Terry. In living color.

  • BUDHA ( February 16th, 2009 at 7:02 pm ):

    ….ONE OTHER THING REAR BRAKES I HOPE WILL BE ON THIS

  • henry@ecbmx ( February 16th, 2009 at 7:25 pm ):

    Please use the Sunday dropouts with the integrated tensioners.

  • Greg ( February 16th, 2009 at 8:44 pm ):

    Wow. Perfect.

  • weev ( February 16th, 2009 at 8:56 pm ):

    that bike is dope! can’t wait to scope the production model.

  • Kevin ( February 16th, 2009 at 10:14 pm ):

    Excited about all the Flatware stuff that will be coming out.
    Twombolts in shorter sizes.
    Hope you do a pivital flat seat and a director fork with 990 mounts.

  • spacebagel ( February 17th, 2009 at 3:27 am ):

    Director forks with 990 mounts?

    Why not cantilever mounts for low profile cantilevers George French style?! Lighter, more out of the way, none of that wasteful looped brake cable.

    It’s the ONLY sensible solution for front brakes on a BMX!

    By the way is that an ISIS interface I’m seeing at the ends of those plegs?!

    By the way that protuding headset makes me CRINGE!

    This is going to start a new trend in frame designs even in street/park frames as everyone else will jump on the bandwagon.

    BAD BAD DIRECTION BMX IS GOING!

  • B-real ( February 17th, 2009 at 5:42 am ):

    Those pegs look awesome, what’s the specs on them, and when will they be out?

  • smuggler ( February 17th, 2009 at 5:43 am ):

    Dear Odyssey,

    I want to smuggle some drugs inside Odyssey forks to Zimbabwe, will it void my warranty?

  • Logan ( February 17th, 2009 at 2:38 pm ):

    That is totaly awesome! I’m going to have to get me some of that.

  • zach thorne ( February 17th, 2009 at 7:41 pm ):

    blue rims please and ive heard some thingsa bout a g-coaster deatils please

  • bikedog ( February 17th, 2009 at 10:15 pm ):

    the frame looks a lot like stuff sunday has helped develop, like the 1 piece wishbone, stay caps, and the shaved headtube. possibly hollow dropouts too?
    the bar height setup doesn’t make sense to me though, bars not super tall but plenty of spacers and a zero rise stem?
    and how different from the chase bars are they? how different is this proto fork from the one in production? no 3/8″ g-coaster? kind of baffled.

  • bikedog ( February 17th, 2009 at 10:18 pm ):

    oh yeah it’s about time odyssey made a headset again. it’s been ages.
    Maybe sealed needle bearings?

  • ben ( February 17th, 2009 at 11:42 pm ):

    The frames current geometry is:

    18.90″ TT
    11.80″ BB Height
    12.48″ Slammed Rear Length
    75° Headtube
    72° Seattube

    There also is no Wishbone on the frame and the dropouts are straight forward and 4mm thick. More info when we have it. Thanks for the comments.-ben

  • ben ( February 17th, 2009 at 11:46 pm ):

    Quick note about the Shaved Headtube.

    This has been tested for quite a long time now in the harshest of street riding conditions and works amazing and holds up really good. As in, you never notice it and it hasn’t been an issue. It is simply removing material that is not needed and does nothing. With that being said, we figured it would be a good place to save weight and allow us to add it to the areas where it would be important.-ben

  • bikedog ( February 18th, 2009 at 8:22 pm ):

    thanks Ben for the info you have. The glare off the right chainstay makes it look like there’s a tiny wishbone, or maybe it’s a bridge? 72 degree seattube? apparently there are a few of us who ride street with shorter flatland frames. hopefully the final product fits the aitken 2.25 tire yet have enough room for a 25-28 tooth sprocket, although i don’t think that’s completely possible.

  • ben ( February 19th, 2009 at 4:50 pm ):

    This is a “hardcore” (for lack of a better term) flat frame. A lot of riders run 1.75″ tires and the micro-drives is what makes a 12.5″ rear end possible. This frame also is NOT recommended for street riding. It is not made for that in any way.

  • Quenton ( February 20th, 2009 at 1:36 am ):

    I would buy the bike almost exactly as is. The only changes I’d make are: Chrome Rims, Rear Breaks, and the G-Sport Freecoaster.

  • Xeli ( February 20th, 2009 at 2:46 am ):

    Wooow looks awesome

  • king sunny ( February 20th, 2009 at 12:02 pm ):

    THANK YOU VERY MUCH ODYSSEY FOR LOVING FLATLAND . FLATWARE LOOKS WICKED.
    FULL RESPECT AND SUPPORT TO U .

  • Allan Reyes ( February 21st, 2009 at 12:57 am ):

    Nice new set-up terry i like it.it is available now in the market?

  • IndyBarber73 ( February 22nd, 2009 at 7:35 am ):

    Nice bike Terry,I would have liked to talked to you at the fight with flight,about a few bike parts.

  • BUDHA ( February 23rd, 2009 at 9:37 am ):

    HEY GUYS HERE I GO WITH MY 2CENTS AGAIN……
    AS I’M SURE U-GUYS R-GETTING THE FEELING THAT THERE R PEOPLE OUT THERE THAT NEED A FRAME LIKE THIS FOR STREET/PARK/DIRT PURPOSES I HOPE YUO GUYS WILL ACCOMDATE US. LIKE: 19.5 TT, 13.5 CS, 75DEG. HT, 71DEG ST, REMOVABLE BRAKE BOSSES … I DO REALIZE THAT CHASE IS ALSO WORKIN ON A FRAME….CAN’T WAIT 2C HOW THAT WILL LOOK LIKE…

  • ru_sasha ( February 27th, 2009 at 3:22 am ):

    nice color

  • GroundcontrolBMX » Terry Adams Bike Check ( March 10th, 2009 at 6:46 am ):

    [...] Frame design looks to be really good, there are no silly bends, the down tube looks great. But it does seem to have short chain stays, supprising since there seems to be more and more demand for longer frames. Although Terry is a small rider then we should probably see a longer frame from Chase? This is a prototype so it will be nice to see the final F&F up close when it is released. ODYSSEYBMX.COM | DAILY WORD | DIRECT LINK [...]

  • BUDHA ( March 12th, 2009 at 10:08 pm ):

    HEY….BY THE WAY AS THEY SAY…
    HOW ABOUT A STREET TYPE FRAME THAT IS FLATLAND INSPIRED…..? HOW BOUT IT MEANING LOW TT, DT FORK CLEARANCE, SHORTY TYPE REAR END……HOOK US UP….YO….!

  • Timm-e ( March 13th, 2009 at 5:17 am ):

    budha needs to give up methinks..also that would feel horrible for street!

  • Dan ( March 29th, 2009 at 8:39 pm ):

    okay people that isnt a street bike! it’s for flatland cuz thats wut terry rides. all of you who it wud suck for street are rite, but thats not wut terry rides so its all good…

  • BUDHA ( April 1st, 2009 at 10:52 pm ):

    TIMM-E….
    BRO DONT HATE….JUST CUZ I NEED 2 WEAR A MAGNUM & YOU WEAR A THIMBLE ….. HOPE YOU CAN UNDERSTSAND THE ANALOGY…..NO DIS-RESECT INTENDED

  • OdysseyBMX.com / Daily Word » Blog Archive » Terry Adams’ Bayou Bars ( April 30th, 2009 at 2:45 pm ):

    [...] may recognize these bars from Terry Adam’s bike check a few months ago. It’s the first product to come out of our Flatware line and they’re [...]

  • Rainer ( May 5th, 2009 at 9:31 am ):

    Hey that fork looks like it has light offset like 16mm ? I would love that, also if it would have removable brake mounts on it. that would be the fork of my dreams. I am excited

  • Xray ( May 25th, 2009 at 8:34 am ):

    Занятно. Иногда такое бывает, что хоть стой хоть падай.

  • valtrex for kids ( June 14th, 2009 at 7:15 pm ):

    difference between zovirax and valtrex…

    valtrex. valtrex side effect causes stomach ulcers. valtrex for kids. valtrex. valtrex psychosis. …

  • Immaste ( October 8th, 2009 at 10:08 pm ):

    Хм: Читаю и понимаю, что ничего не понимаю о чем речь:)

  • cody ( January 11th, 2010 at 5:16 pm ):

    you are my favorite flatlander and I want your bike I watched your props episode about 8 times.

  • cody ( January 11th, 2010 at 5:17 pm ):

    you are my favorite flatlander and I want your bike I watched your props episode about 8 times and do you get your bike from dans comp.

  • jay smith ( January 13th, 2010 at 10:40 pm ):

    what color blue is that lol i want to powdercoat my frame that color

Leave a Reply